Leak Repair Easy Squeeze Premium Liquid Rubber
Leak Repair Premium Liquid Rubber is extremely effective for sealing fasteners, laps & penetrations on various roof surfaces. This one-component product has excellent adhesion to properly prepared substrates. Our repair product is thermally stable and resists cracking and peeling due to ozon and ultraviolet exposure.
Size: 0.5 gallon pouch
✓ One-Component, brush-grade product that requires minimal surface preparation
✓ Provides excellent protection against oxidation, humidity and corrosive environments
✓ Strong and flexible featuring 1,000 PSI tensile strength and 400% elongation
✓ Dry to the touch in 1-2 hours
✓ Withstands expansion and contraction of the roof
✓ Seals & Waterproofs by developing early water resistance, eliminating potential wash-off issues
✓ Extended application season, allowing work to be performed even during colder months
✓ Resists cracking and peeling due to its high tolerance of hot and cold weather extremes
0.9 Gal (3.41 L)
Product Dimensions (in.)
6.5 x 6.5 x 7.5
Item Package Quantity
Approximate Coverage Per Gallon (sq. ft)
Unit of Measure
Unit of Measure Quantity
Minimum Coats Required
CA Residents: Prop 65 Warning(s)
Solvent Clean-Up Required
ENERGY STAR Certified
UL Fire Rated
VOC Level grams/liter
Drying Time (Hours)
2 - 4
THORITE® Leak Repair is ready to use - no mixing required. It can be applied with a paint brush or low nap roller. For larger commercial jobs, we recommend using Inland Coatings products. Call for specifications 800-456-8467.
Read all label instructions before beginning. The surface must be free of any oils, moisture or other contaminates that may interfere with good adhesion. Remove any loose material from seams or other surfaces with a wire brush or scraper. Oil and grease should also be removed with solvents or an appropriate detergent cleaner. In many cases, high pressure water blast will be sufficient enough to prepare the surface.
Standard product coverage on a smooth surface is 1 gallon per 80-100 square feet. More than one coat is recommended. More coats equals a longer life.
Weather & Drying Guidelines:
THORITE® Leak Repair is best applied between 40°F to 110°F. Apply when there is no inclement weather in the forecast. Starts to dry in 1-2 hours depending on thickness of application and weather. Allow to cure for a minimum of 24 hours between coats. Variance in temperature and humidity will affect drying time.
Clean-up, Storage and Disposal:
Clean any spills with dikes or absorbents to prevent migration and entry into sewers or streams. Store unused product in its original container, tightly sealed in a well-ventilated place. Dispose of this product to hazardous or special waste collection point, in accordance with state, local or federal requirements.