✓ Fire Resistance with Class A fire rating
✓ Reduce roof temperatures with 87% solar reflectance
✓ Superior Durability – resist acids, alkali and salts for longer product lifespan
✓ Seal and Waterproof by eliminating potential wash-off problems and early water resistance
✓ Superior Weatherability by increasing longevity with high ozone and UV resistance
✓ Thermal Stability – resist cracking and peeling due to high tolerance of hot and cold weather extremes
✓ Expandability – withstands the expansion of seasons with 1,500 PSI tensile strength and 500% elongation
✓ Easy Application: spray, roll or brush
✓ Extended Application Season: can apply even during colder months due to the superior formuation
0.9 Gal (3.41 L)
Product Dimensions (in.)
6.5 x 6.5 x 7.5
Item Package Quantity
Approximate Coverage Per Gallon (sq. ft)
Unit of Measure
Unit of Measure Quantity
Minimum Coats Required
CA Residents: Prop 65 Warning(s)
Solvent Clean-Up Required
ENERGY STAR Certified
UL Fire Rated
Drying Time (Hours)
2 - 4
THORITE® XRC2000 Premium Rubber Roof Coating is ready to use - no mixing required. It can be applied with a paint brush or low nap roller. For larger commercial jobs, we recommend using Inland Coatings products. Call for specifications 800-456-8467.
Read all label instructions before beginning. The surface must be free of any oils, moisture or other contaminates that may interfere with good adhesion. Remove any loose material from seams or other surfaces with a wire brush or scraper. Oil and grease should also be removed with solvents or an appropriate detergent cleaner. In many cases, high pressure water blast will be sufficient enough to prepare the surface.
Standard product coverage on a smooth surface is 1 gallon per 80-100 square feet. More than one coat is recommended. More coats equals a longer life.
Weather & Drying Guidelines:
THORITE® XRC2000 Premium Rubber Roof Coating is best applied between 50°F to 100°F. Apply when there is no inclement weather in the forecast. Starts to dry in 1-2 hours depending on thickness of application and weather. Allow to cure for a minimum of 24 hours between coats. Variance in temperature and humidity will affect drying time.
Clean-up, Storage and Disposal:
Clean any spills with dikes or absorbents to prevent migration and entry into sewers or streams. Store unused product in its original container, tightly sealed in a well-ventilated place. Dispose of this product to hazardous or special waste collection point, in accordance with state, local or federal requirements.